Skip to content Skip to footer
GMTCNT
GMTCNT
GMTCNT
GMTCNT
Close
GMTCNT MICNO 0.40 kW–2.2 kW AC drive: 220 VAC single-phase, V/f & sensorless vector control, high starting torque, Modbus-RS485 communication, analog I/O, and PID support. GMTCNT MICNO 0.40 kW–2.2 kW AC sürücü: 220 VAC monofaze, V/f & sensörsüz vektör kontrol, yüksek başlangıç torku, Modbus-RS485 haberleşme, analog I/O ve PID destekli.
GMTCNT MICNO 0.40 kW–2.2 kW AC drive: 220 VAC single-phase, V/f & sensorless vector control, high starting torque, Modbus-RS485 communication, analog I/O, and PID support. GMTCNT MICNO 0.40 kW–2.2 kW AC sürücü: 220 VAC monofaze, V/f & sensörsüz vektör kontrol, yüksek başlangıç torku, Modbus-RS485 haberleşme, analog I/O ve PID destekli.
GMTCNT MICNO 0.40 kW–2.2 kW AC drive: 220 VAC single-phase, V/f & sensorless vector control, high starting torque, Modbus-RS485 communication, analog I/O, and PID support. GMTCNT MICNO 0.40 kW–2.2 kW AC sürücü: 220 VAC monofaze, V/f & sensörsüz vektör kontrol, yüksek başlangıç torku, Modbus-RS485 haberleşme, analog I/O ve PID destekli.
GMTCNT

MICNO 0.40 kW~2.2 kW

MICNO VARIABLE FREQUENCY DRIVE (VFD) – AC DRIVE – INVERTER
  • 1 x 220VAC ( +/- 15% ) 50/60Hz supply voltage
  • V/F and Open-loop vector control
  • High starting torque (150% at 0.5Hz)
  • 6 PNP/NPN digital inputs
  • 1 relay output
  • 1 analog input, switchable 0-10VDC / 4-20mA
  • 1 analog output, switchable 0-10VDC / 4-20mA
  • PID control
  • RS-485 communication port supporting built-in Modbus RTU
  • Easy-to-use interface
  • Removable operator panel (Can be mounted on the panel using a standard Ethernet cable)
  • Economical solution for fan – pump applications with Dual operating mode
  • Ability to automatically set motor parameters with Autotune feature
  • Built-in brake chopper (up to 30kW)
  • Output frequency adjustable up to 3000Hz
User Manual
PC Software
Modbus Address Map
Frenleme Modülleri
2D Drawing File
3D Drawing File
  • Supply Voltage: 1x220VAC (Single-phase)
  • Supply Frequency: 47 Hz to 63 Hz
  • Control Mode: V/f control mode, Sensorless vector control mode, Torque control mode
  • Frequency Range: V/f control: 0 Hz to 3000.0 Hz
  • Vector control: 0 Hz to 300.00 Hz
  • Setting Resolution: Digital: 0.01 Hz, Analog: Maximum frequency / 2000
  • Overload Current Rating: 150% for 60 sec, 180% for 10 sec, 200% for 3 sec
  • Acceleration / Deceleration: 0.1 sec to 3600.0 sec
  • Starting Torque: 150% at 0.5Hz in Vector control mode
  • 150% at 1Hz in V/f control mode
  • DC Braking: Available
  • PID Function: Available
  • Communication: RS-485 communication supporting standard MODBUS RTU protocol
  • Internal Brake: Available
  • Digital Inputs: 5 PNP or NPN selectable digital inputs
  • Relay Output: 1 programmable relay output
  • High-Speed Pulse Input: 1 high-speed pulse input (Can also be used as a digital input)
  • High-Speed Pulse Output: 1 high-speed pulse output (Can also be used as a transistor output)
  • Analog Input: 1 selectable analog input (4-20 mA or 0-10 V)
  • Analog Output: 1 programmable selectable analog output (4-20 mA or 0-10 V)
PRODUCT CODEPOWER RATINGCURRENT RATINGSUITABLE BRAKE RESISTOR
MICNO-00040S0.4 kW2.3 A300W/200Ω
MICNO-00075S0.75 kW4 A300W/200Ω
MICNO-00150S1.5 kW7 A300W/200Ω
MICNO-00220S2.2 kW9.6 A3000W/100Ω
PRODUCT CODEWIDTH (mm)HEIGHT (mm)DEPTH (mm)
MICNO-00040S80150125
MICNO-00075S80150125
MICNO-00150S80150125
MICNO-00220S110185153
  • Operating Temperature: -10°C to 50°C (If ambient temperature is above 40°C, the carrier frequency must be below 2.0 kHz)
  • Storage Temperature: -20°C to 60°C
  • Humidity: Below 90% RH (Non-condensing)
  • Protection Class: IP20