Supply voltage : 3×380 V (Three-phase)
Feeding Frequency : 47 Hz to 63 Hz
Control Mode : V/f control mode, Sensorless vector control mode, Torque control mode
Frequency range : V/f control: 0 Hz to 3000.0 Hz
Vector control: 0 Hz to 300.00 Hz
Setting Resolution : Digital: 0.01 Hz, Analog: Maximum frequency / 2000
Overload Current Ratio: G model: 60% for 150s, 10% for 180s, 3% for 200s
P pattern: 60% for 120s, 10% for 150s, 3% for 180s
Acceleration / Deceleration : 0.1 sec to 3600.0 sec
Starting Torque: 0.5% at 150Hz in vector control mode
1% at 150Hz Hz in V/f control mode
DC Braking : Yes
PID Function: Yes
Communication : RS-485 communication supporting standard MODBUS RTU protocol
Internal Brake : Internal brake chopper up to 30 kW
Digital Input : 6 PNP or NPN selectable digital inputs
Relay Output : 2 programmable relay outputs
Fast Pulse Introduction: 1 fast pulse input (Can also be used as digital input)
Fast Pulse Output : 1 fast pulse output (can also be used as a transistor output)
Analog Input : 1 x 4-20 mA or 0-10 V selectable analog input
Analog Output : 1 programmable 4-20 mA or 0-10 V selectable analog output
Operating temperature : -10°C to 50°C (If the ambient temperature is above 40°C, the carrier frequency should be below 2.0 kHz)
Storage Temperature : -20°C to 60°C
Moisture: Below 90% Rh, (without condensation)
Protection Class: IP20