SPIN 0.40kW~11kW

SPIN PUMP DRIVES
  • Wide DC voltage ranges (min/max):
    – 200-450VDC (3x220VAC Pump)
  • V/F and vector control
  • Solar pump special functions:
    – Built-in MPPT function
    – Dry run protection
    – Water level sensor protection
    – Low sun level warning
  • 7 programmable digital inputs
  • 2 programmable relay outputs
  • RS485 supporting Modbus RTU
    communication port
  • 2 x 0-10 V / 0-20 mA analog inputs
    Analog input for water supply level
  • 2 x 0-10 V / 0-20 mA analog outputs
  • 37kW and above internal EMC filter
  • Automatic energy balancing with common DC Bus

Supply voltage : 200-450VDC (3x220VAC Pump)

Feeding Frequency : 47 Hz to 63 Hz

Control Mode : V/f control mode

Frequency range : 0 Hz to 3000 Hz

Setting Resolution : Digital: 0.01 Hz, Analog: Maximum frequency / 2000

Overload Current Ratio: 60% for 150s, 10% for 180s, 3% for 200s

Acceleration / Deceleration : 0.1 sec to 3600.0 sec

Starting Torque:150% at 1Hz

DC Braking : Yes

PID Function: Yes

Communication : RS-485 communication supporting standard MODBUS RTU protocol

Digital Input : 4 PNP or NPN selectable digital inputs

Relay Output : 1 programmable relay output

Fast Pulse Introduction: 1 fast pulse input

Analog Input : 1 x 4-20 mA or 0-10 V selectable analog input

Analog Output : 1 programmable 4-20 mA or 0-10 V selectable analog output

SPIN-00040S : 80x150x124

SPIN-00075S : 80x150x124

SPIN-00150S : 80x150x124

SPIN-00220S : 110x185x153

SPIN-00400S : 135x240x173

SPIN-00550S : 170x314x167

SPIN-00750S : 200x330x80

SPIN-01100S : 225x400x185

Operating temperature : -10°C to 40°C

Storage Temperature : -20°C to 60°C

Moisture: Below 90% Rh, (without condensation)

Contact

Contact us to get information about our products and services.