Software
01. GMTSuite PLC Editor Program(ver 1.0.3.0)
GMTSuite is our next-generation software that replaces GMTSoft. It is a Windows-based application. This software addresses all the missing features of GMTSoft and offers a more user-friendly programming editor. With this editor, you can write all logical programs for our PLC products using the Ladder diagram method and transfer them to CPUs via Ethernet and USB ports. GMTSuite is also used to program our Mini PLCs with Display.
Note: It is recommended to uninstall the old version if it is installed on your PC before installing this version. For a PLC CPU that works with GMTSoft to work with GMTSuite, its Firmware and Bootloader must be updated. You can download the update instructions via the “UPDATE” button. A CPU working with GMTSuite cannot be reverted to work with GMTSoft.
02. GMTSoft PLC Editor Program (ver 5.0.1.8)
GMTSoft is Windows-based software where you can write all the logical programs for our products. You can transfer PLC programs prepared with Ladder diagrams to the device by connecting via the Ethernet port.
03. USB Driver
The following driver is required for uploading programs, downloading programs, and establishing online links for Mini PLCs with Display and GMTSuite PLCs. Additionally, the same driver is required for the USB-RS485 converter with the code GCM-485-USB. The appropriate driver file must be installed before establishing a connection.
04. PDesignerPro HMI Editor Program (V1.8) (Build251215)
It is the essential editor for programming GHPro and GHPro2 Series HMIs.
05. Edge Access – GMT & ZeroTier One & Mobile Application Link
Remote connectivity application for GHPro and GHPro2 series HMIs.
06. PDesigner HMI Editor Program (V4.5.1.1) (Build251107)
This is the editor required to program GHS, MSG, TSG, FLG, and TG Series HMIs. Programs written in version 2.2 and above of the GOP HMI Editor can be opened and updated with this program. Tag lists can be uploaded from PLC software developed with GMTSuite using the current GMTSuite PLC driver.
“It is recommended to uninstall the old version of the editor from your computer before installing this version of PDesigner HMI Editor, and to perform the installation after the uninstallation process.”
07. GOP HMI Editor Program (ver 2.5.1.1)
With this version, the program can be installed in Turkish or English. Communication can be established with GLC396X and GLC496X series PLCs via the Ethernet port using the GMTCNT TCP driver. Tag lists can be uploaded from PLC software developed with GMTSuite via the added GMTSuite PLC driver. You can prepare and upload all image and program works with our Windows-based editor program.
08. PC Software for MICNO, GAIN, and GESI Series VFDs
This software connects to Micno, GAIN, and GESI series Speed Control Devices (VFDs) via the RS485 port. This allows you to control the inverter, change parameters, save and back them up, and restore previously saved parameters.
09. GOP HMI Editor Program (ver 2.0)
With our Windows-based editor program, you can prepare and load all image and program work onto touch screens.
10. GOP HMI Editor Program (ver 1.6)
With our Windows-based editor program, you can prepare and load all image and program work onto touch screens.
11. USB Driver for HMI
The following driver is required to load programs onto HMIs via USB, unload programs, and establish an online link.
12. VNC Software
Enables the transfer of screen images from GMTCNT HMIs with Ethernet ports to a PC and allows them to be operated from there. You can also connect to the HMI over the internet using the port forwarding process you perform on your modem.
13. GMTViewer Software
You need to run this software so that our technical support team can connect to your computer over the internet and provide support.
14. RustDesk Remote Support Software
You need to run this software so that our technical support team can connect to your computer over the internet and provide support.
15.G-930 Zigbee RF Module Configuration Software
This is the software you will use to configure the products when more than two RF modules are used or when communication settings need to be changed. For the software to work, your computer must have a default RS232 port, or a USB-RS232 converter must be plugged in and working before running the software.
16. GMTCNT SD Series Servo PC Software
You can configure the settings of your SD Series Servo via PC using this program. The USB Driver is also available in the PC software file.
17. GMTCNT SD7 Series Servo PC Software
You can configure the settings of your SD7 Series Servo via PC using this program. The USB Driver is also available in the PC software file.
18. GMTCNT GSSF Series Servo PC Software
You can configure the settings of your GSSF Series Servo via PC using this program.
19. GMTCNT GSS3 Series Servo PC Software
You can configure the settings of your GSS3 Series Servo via PC using this program.
20. SD - SD7 Servo USB Driver
You can configure the settings of your SD and SD7 Series Servos via PC using this program.
21. PC Software for GAIN Speed Control Devices
This software connects to GAIN series Speed Control Devices via the RS485 port. This allows you to control the inverter, change parameters, save and back them up, and restore previously saved parameters.
22. G-9921 Wireless Lora - RS232/485/422 Converter Configuration Software
This software is used to configure products when more than two RF modules are used or when communication settings need to be changed. Your computer must have an RS232 port or a working USB-RS232 converter before starting the application.
23. G-LORA Wireless Lora - RS485 Converter Configuration Software
This software is used to configure products when more than two RF modules are used or when communication settings need to be changed. Your computer must have an RS485 port or a working USB-RS485 converter before starting the application.
24. PC Software for GFD Speed Control Devices
This software connects to GFD series Speed Control Devices via the RS485 port. It allows you to control the inverter, modify parameters, backup settings, and restore previously saved configurations.
