Skip to content Skip to footer
GMTCNT
GMTCNT
GMTCNT
GMTCNT
Close
GLC-296T Domestically Produced PLC CPU Module: 24 VDC, 273 point modular structure, Ethernet/RS485, high-speed counter, analog input-output, and 100 kHz pulse output. GLC-296T Yerli Üretim PLC CPU Modülü: 24 VDC, 273 nokta modüler yapı, Ethernet/RS485, hızlı sayıcı, analog giriş-çıkış ve 100 kHz puls çıkışı.
GLC-296T Domestically Produced PLC CPU Module: 24 VDC, 273 point modular structure, Ethernet/RS485, high-speed counter, analog input-output, and 100 kHz pulse output. GLC-296T Yerli Üretim PLC CPU Modülü: 24 VDC, 273 nokta modüler yapı, Ethernet/RS485, hızlı sayıcı, analog giriş-çıkış ve 100 kHz puls çıkışı.
GLC-296T Domestically Produced PLC CPU Module: 24 VDC, 273 point modular structure, Ethernet/RS485, high-speed counter, analog input-output, and 100 kHz pulse output. GLC-296T Yerli Üretim PLC CPU Modülü: 24 VDC, 273 nokta modüler yapı, Ethernet/RS485, hızlı sayıcı, analog giriş-çıkış ve 100 kHz puls çıkışı.
GMTCNT

GLC-296T

Key Features of Domestically Produced PLC CPU Module

  • 24 VDC power supply

  • 9 Channels 24 VDC PNP/NPN input

  • Modular structure, supporting up to 273 points with the possibility to connect a maximum of 16 expansion modules

  • 100MB Ethernet port for network access

  • RS232 and RS485 communication ports

  • MODBUS RTU Master/Slave protocol support

  • ASCII read/write support

  • Floating-point (decimal) arithmetic support

  • 196 kB program / 10 kB variable memory

  • Maximum 20 kHz program cycle speed

  • DIN RAIL mounting

  • Ability to connect 3 dual-phase (A, B, Z) encoders or 3 high-speed counter inputs (50 kHz)

  • 1 channel 0-10 VDC / 0-20 mADC selectable analog input (12-bit resolution)

  • 1 channel 0-20 mADC / 0-10 VDC (with a $500\ \Omega$ resistor) analog output (14-bit resolution)

  • 6 Channel transistor output (450mA @ 24VDC, PNP), 1 Analog Input, 1 Analog Output

  • 3 Channel 100 kHz Pulse Output

User Manual
3D Drawing File
EPLAN File
FeatureSpecification
Supply24VDC (+/- 15% tolerance)
Power Consumption3W max.
Program Cycle Speed20 kHz max.
Programming LanguageLadder Editor
CommandsLogic, mathematical, communication, high-speed counter and pulse outputs, time and counting relays, special purpose function blocks
CertificationCE marked

  • Ethernet Port: 100MB Ethernet port, program upload, establishing link

  • Mini USB Port: Program upload, establishing link

  • RS-232 Port: Serial port, 4800..115200 baudrate speed range, supports ModBUS RTU protocol

  • RS-485 Port: Serial port, 4800..115200 baudrate speed range, supports ModBUS RTU protocol

  • Digital Inputs: 9 channels, 16.5 – 26VDC PNP/NPN, 3 dual-phase (A,B,Z) encoders or 3 high-speed counters (50kHz) can be connected

  • Digital Outputs: 6 channels 24VDC 450mA short-circuit protected PNP transistor output

  • Analog Inputs: 1 channel 0-10 VDC / 0-20 mADC / 4-20 mADC selectable analog input (12-bit resolution)

  • Analog Outputs: 1 channel 0-20 mADC / 0-10 VDC (with a $500\ \Omega$ resistor) analog output (14-bit resolution)

  • Program Memory: 196kB

  • Variable Memory: 10kB

  • Temperature: 0°C to +50°C (Non-freezing)

  • Humidity: 5%rH to 95%rH (Non-condensing)

  • Environment: Must be used in an environment free of flammable and corrosive gases