SPIN2 2.2 kW
Input Voltage Ranges
Single Phase: 180–450 VDC / 220–240 VAC, 50/60 Hz
Three Phase: 220–900 VDC / 380–480 VAC, 50/60 Hz
Communication
MODBUS RTU (RS485)
Input / Output (I/O)
2 Analog Inputs
1 Analog Outputs
4 Digital Inputs
1 Relay Output
Solar Pump Dedicated Functions
Built-in MPPT Function
Control Modes
V/F Control
Vector Control
Protection Functions
Overtemperature Protection
Overvoltage Protection
Undervoltage Protection
Open Circuit Protection
Short Circuit Protection
Dry Run Protection
- Supply Voltage: 180–450 VDC / 220–240 VAC, 50/60 Hz
- Supply Frequency: 50 Hz to 60 Hz
- Control Mode: V/F control mode
- Frequency Range: 0 Hz to 320 Hz
- Setting Resolution: Digital: 0.01 Hz, Analog: Maximum frequency / 6.500.0
- Overload Current Ratio: 150% for 60 sec, 180% for 10 sec, 200% for 3 sec
- Acceleration / Deceleration: 0.1 sec to 3600.0 sec
- Starting Torque: 150% at 1 Hz
- DC Braking: Available
- PID Function: Available
- Communication: RS-485 communication supporting standard MODBUS RTU protocol
- Digital Inputs: 7 programmable digital inputs (Based on the initial list). *Note: The specific section mentions 4 PNP/NPN inputs; the broader feature list is prioritized here.*
- Relay Outputs: 2 programmable relay outputs
- Analog Inputs (General): 2 analog inputs (0-10 V / 0-20 mA) (Based on the initial list) and analog input for water source level (separately mentioned). *Note: The specific section mentions 1 analog input 4-20 mA / 0-10 V; the broader feature list is prioritized here.*
- Analog Outputs: 2 analog outputs (0-10 V / 0-20 mA)
- Communication Port: RS485 communication port supporting Modbus RTU
| PRODUCT CODE | POWER RATING | CURRENT RATING | SUITABLE BRAKE RESISTOR |
|---|---|---|---|
| SPIN2-00220H | 2.2 | 9.6 | – |
| PRODUCT CODE | WIDTH (mm) | HEIGHT (mm) | DEPTH (mm) |
|---|---|---|---|
| SPIN2-00220S | 72 | 190 | 146 |
- Operating Temperature: -10°C to 40°C
- Storage Temperature: -20°C to 60°C
- Humidity: Below 90% RH (Non-condensing)
