SPIN2 2.2 kW~37 kW
Input Voltage Ranges
Single Phase: 150–450 VDC / 220–240 VAC, 50/60 Hz
Three Phase: 220–900 VDC / 380–480 VAC, 50/60 Hz
Communication
MODBUS RTU (RS485)
Input / Output (I/O)
2 Analog Inputs
2 Analog Outputs
4 Digital Inputs
1 Relay Output
Solar Pump Dedicated Functions
Built-in MPPT Function
Dry Run Protection
Control Modes
V/F Control
Vector Control
Protection Functions
Overtemperature Protection
Overvoltage Protection
Undervoltage Protection
Open Circuit Protection
Short Circuit Protection
Dry Run Protection
- Supply Voltage: 1x380VAC (Single-phase) *(Note: The DC voltage ranges and 3x380VAC pump output listed in the details differ from this supply voltage.)*
- Supply Frequency: 47 Hz to 63 Hz
- Control Mode: V/f control mode
- Frequency Range: 0 Hz to 3000 Hz
- Setting Resolution: Digital: 0.01 Hz, Analog: Maximum frequency / 2000
- Overload Current Ratio: 150% for 60 sec, 180% for 10 sec, 200% for 3 sec
- Acceleration / Deceleration: 0.1 sec to 3600.0 sec
- Starting Torque: 150% at 1 Hz
- DC Braking: Available
- PID Function: Available
- Communication: RS-485 communication supporting standard MODBUS RTU protocol
- Digital Inputs: 4 PNP or NPN selectable digital inputs
- Relay Output: 1 programmable relay output
- High-Speed Pulse Input: 1 high-speed pulse input
- Analog Input: 1 selectable analog input (4-20 mA or 0-10 V)
- Analog Output: 1 programmable selectable analog output (4-20 mA or 0-10 V)
| PRODUCT CODE | POWER RATING | CURRENT RATING | SUITABLE BRAKE RESISTOR |
|---|---|---|---|
| SPIN-00075H | – | – | – |
| SPIN-00150H | – | – | – |
| SPIN-00220H | – | – | – |
| **(No data provided. Table structure is preserved.)** | |||
| PRODUCT CODE | WIDTH (mm) | HEIGHT (mm) | DEPTH (mm) |
|---|---|---|---|
| SPIN-00075H | 110 | 185 | 153 |
| SPIN-000150H | 110 | 185 | 153 |
| SPIN-000220H | 110 | 185 | 153 |
- Operating Temperature: -10°C to 40°C
- Storage Temperature: -20°C to 60°C
- Humidity: Below 90% RH (Non-condensing)
