GMD 0.40kW~2.2kW
GMD SPEED CONTROLLER – AC DRIVE – INVERTER
- 1 x 220 VAC (+ 10% / – 15%) 50/60 Hz supply voltage
- V/F or Dynamic torque vector control
- Compact design
- Fastest CPU in its class
- Ability to drive synchronous motors
- Quiet operation thanks to fanless cooling at 0,4kW and 0,75kW
- Optional active or passive Cooling Fan
- Ability to enter second engine parameters
- Life warning information for Cooling Fan and Condenser
- Power consumption information
- Total runtime
- Yüksek başlangıç torku ( 3% at 150Hz )
- 5 PNP/NPN digital inputs
- 1 relay output
- 1 x 0-10VDC / 4-20mA analog input
- 1 0-10VDC analog output
- Built-in PID automatic control
- RS-485 communication port supporting onboard Modbus RTU
- Easy to use interface
- Ability to automatically adjust engine parameters with Autotune feature
- Built-in brake chopper
- Output frequency adjustable up to 400Hz
Feed : 1x220VAC (+ 10% / – 15%) 50/60Hz
Control mode : V/F or Dynamic Torque Vector Control
Frequency range : 0.01 Hz to 400 Hz
Setting Resolution : Digital: 0.01Hz
Analog: Maximum frequency / 1000
Overload Current Ratio: 60% for 150 seconds
Acceleration / Deceleration : 0.00 sec to 3600 sec
Starting Torque: 3% at 150Hz
DC Braking : Yes
PID Function: Yes
Communication : RS-485 communication supporting standard MODBUS RTU protocol
Internal Brake : Yes
Digital Input : 6 PNP or NPN selectable digital inputs
Relay Output : 2 programmable relay outputs
Transistor Output : 1 fast pulse input (Can also be used as digital input)
Analog Input : 1 x 4-20 mA or 0-10 V selectable analog input
Analog Output : 1 programmable 4-20 mA or 0-10 V selectable analog output
Operating temperature : -10°C to 50°C (If a gapless installation is made, the ambient temperature should be below 40°C.)
Storage Temperature : -20°C to 60°C
Moisture: Below 90% Rh, (without condensation)
Vibration : 9.8 m/s² (9 Hz to 20 Hz), 2 m/s² (20 Hz to 55 Hz)
Protection Class: IP20
