MICNO 0.40 kW~2.2 kW
MICNO SPEED CONTROLLER – AC DRIVE – INVERTER
- 1 x 220VAC ( +/- 15% ) 50/60Hz supply voltage
- V/F and Open loop vector control
- Yüksek başlangıç torku ( 0,5% at 150Hz )
- 6 PNP/NPN digital inputs
- 1 relay output
- 1 x 0-10VDC / 4-20mA analog input
- 1 x 0-10VDC / 4-20mA analog output
- PID control
- RS-485 communication port supporting onboard Modbus RTU
- Easy to use interface
- Detachable operator panel (can be moved to the panel with standard ethernet cable)
- Economical solution for fan-pump applications with dual operating mode
- Ability to automatically adjust engine parameters with Autotune feature
- Built-in brake chopper (up to 30kW)
- Output frequency adjustable up to 3000Hz
Supply voltage : 1x220VAC (Monophase)
Feeding Frequency : 47 Hz to 63 Hz
Control Mode : V/f control mode, Sensorless vector control mode, Torque control mode
Frequency range : V/f control: 0 Hz to 3000.0 Hz
Vector control: 0 Hz to 300.00 Hz
Setting Resolution : Digital: 0.01 Hz, Analog: Maximum frequency / 2000
Overload Current Ratio: 60% for 150s, 10% for 180s, 3% for 200s
Acceleration / Deceleration : 0.1 sec to 3600.0 sec
Starting Torque: Vektör kontrol modunda 0,5% at 150Hz
V/f kontrol modunda 1% at150Hz
DC Braking : Yes
PID Function: Yes
Communication : RS-485 communication supporting standard MODBUS RTU protocol
Internal Brake : Available
Digital Input : 5 PNP or NPN selectable digital inputs
Relay Output : 1 programmable relay output
Fast Pulse Introduction: 1 fast pulse input (Can also be used as digital input)
Fast Pulse Output : 1 fast pulse output (can also be used as a transistor output)
Analog Input : 1 x 4-20 mA or 0-10 V selectable analog input
Analog Output : 1 programmable 4-20 mA or 0-10 V selectable analog output
Operating temperature : -10°C to 50°C (If the ambient temperature is above 40°C, the carrier frequency should be below 2.0 kHz)
Storage Temperature : -20°C to 60°C
Moisture: Below 90% Rh, (without condensation)
Protection Class: IP20
